Metric Volume Units Explained: From Microliters to Cubic Meters

A clear guide to metric units of volume, how the prefixes work, how liters relate to cubic meters, and a ladder chart for converting between them.

By CentiConvert · Published · 3 min read

Metric volume units are built from two foundations: the liter and the cubic meter. Prefixes such as milli-, centi- and deci- scale them up or down by powers of ten, which is why metric conversions only ever involve moving a decimal point.

The liter and the cubic meter

The SI unit of volume is the cubic meter (m³). It is derived from the meter, the SI base unit of length. A cubic meter is large, 1,000 liters, so everyday measurements use the liter (L), which the International Bureau of Weights and Measures (BIPM) lists as a non-SI unit accepted for use with the SI.

Since 1964 the liter has been defined as exactly one cubic decimeter (dm³). That single definition links the two families:

  • 1 L = 1 dm³
  • 1 mL = 1 cm³
  • 1 µL = 1 mm³
  • 1,000 L = 1 m³

Metric prefixes used with the liter

Prefix Symbol Factor Unit In milliliters
micro µ 10⁻⁶ microliter (µL) 0.001 mL
milli m 10⁻³ milliliter (mL) 1 mL
centi c 10⁻² centiliter (cL) 10 mL
deci d 10⁻¹ deciliter (dL) 100 mL
— — 1 liter (L) 1,000 mL
hecto h 10² hectoliter (hL) 100,000 mL

Other prefixes exist (kiloliter, megaliter), but they are uncommon; large volumes are usually given in cubic meters.

The ladder method

Arrange the units from smallest to largest. Each step between mL, cL, dL and L is a factor of 10:

mL → cL → dL → L

  • Moving up the ladder (to a larger unit), divide by 10 for each step.
  • Moving down the ladder (to a smaller unit), multiply by 10 for each step.

Example: 3 L to cL is two steps down (L → dL → cL), so multiply by 10 × 10 = 100. 3 L = 300 cL.

Example: 450 mL to dL is two steps up (mL → cL → dL), so divide by 100. 450 mL = 4.5 dL.

The step from µL to mL is a factor of 1,000, because there are no common prefixes between them.

Cubic units scale by 1,000

Cubic units grow three times as fast as length units. A meter is 10 decimeters, but a cubic meter is 10 × 10 × 10 = 1,000 cubic decimeters. That is why:

  • 1 m³ = 1,000 L
  • 1 dm³ = 1,000 cm³
  • 1 cm³ = 1,000 mm³

Which unit should you use?

Context Usual unit
Laboratory pipetting µL, mL
Medicine doses mL
Recipes (metric) mL, L, sometimes dL or cL
Drinks labels in Europe cL, L
Engine displacement cm³ (cc), L
Water usage, tanks, pools L, m³

Converting quickly

The metric volume converter shows any value in every metric unit at once. For specific pairs, see cL to mL, L to cm³ and mL to µL. If you are working with US or UK units as well, read metric vs imperial volume.


Figures in this article are checked against the same exact conversion engine that powers our calculators. Spotted an error? Let us know and read our editorial policy.